Filter
Top Products
2-8 Configuring the Printer
Setting the DIP Switches
Use the DIP switches to set the RS232 communication, IrDA, and optional RF
values. To access the DIP switches, open the battery door and remove the
battery. Turn the printer upside down to easily read the DIP switches.
To activate the DIP switches, turn the printer off and then back on. Gently use
a plastic-tipped object to set the DIP switches. Do not use any metal object!
The communications interface settings must be set as defined in the table.
Select DIP switches 4 through 8 for RS232 and 6 through 8 for IrDA.
1 2 3 4 5 6 7 8
Communication
Interface
RS232 OFF OFF OFF
IrDA – Fixed 9600 ON ON OFF OFF OFF
IrDA – Variable Baud ON ON OFF ON OFF
Bluetooth® OFF OFF ON OFF OFF OFF OFF OFF
Baud Rate
38400 OFF OFF
19200 OFF ON
9600 ON OFF
2400 ON ON
Parity
None OFF OFF
Odd ON OFF
Even ON ON
Printer Power
Auto Power Off * ON
Manual Power Off OFF
* The printer automatically turns off after 99 sec. (default) or the time set up by the
System Administrator.