Filter
Top Products
4
Note: If the printer does not have a main battery or is
not connected to the Battery Backup Power, it
loses its charge and the printer’s system
settings.
5. Remove the main battery from the battery
compartment.
6. Connect the Battery Backup Power as shown.
Loading Supplies
1. Turn on the printer.
2. Press the latch buttons and open the supply cover.
3. Pull back the supply lock tab.
4. Open the spring-loaded supply holder. Spread the supply holder tabs apart
with one hand so it adjusts to the size of your supply roll. You can set it at
1.2”, 1.5”, and 2.0”.
5. Press the supply lock tab down to lock the supply holder in place.
Supply
Cover
Latch Buttons
Supply Holder