Filter
Top Products
4-1
Chapter 4. Placing the Graphic in a Format
The graphic image may be a bitmapped graphic or a compliance label overlay.
To include a graphic within a format:
1. Design the graphic image as shown in Chapter 2, “Designing the
Graphic Image.”
2. If you are using RAM, place a Graphic Field in the format file to
reference the graphic. Refer to the following section, “Including the
Graphic Field,” for more information.
NOTE: If you are using temporary storage, you do not need a
Graphic Field in your format to reference the graphic image.
3. Download all the necessary packets (check digit, format, etc.).
NOTE: If you are using the 6030 printer, you must define a script
instead of a batch.
4. Send the graphic file to the printer, if you have not already done so.
Refer to Chapter 3, “Creating a Graphic Packet,” for more
information.