Filter
Top Products
Pelco Manual C930M-E (12/95) 1
INSTALLATION AND OPERATION MANUAL
MODELS C1906, C1925, C19125, C1906/PP,
AND C1925/PP
PRE-WIRED INTERCONNECTING
INVERTING CABLES
3.0 DESCRIPTION
The C1906, C1906/PP, C1925, C1925/PP and C19125
are pre-wired cables designed for interconnecting
Pelco’s Coaxitron
®
receiver/driver with various Pelco
domes or any inverted PT180-24P/PT280-24P pan/tilt
application as listed below.
C1906, C1925, C19125
Domes: ED2820, ED2820-3, ED2820-SL,
ED2920, ED2920-SL,
SB2800, SB2800-2, SB2800-SL,
SB2800-SL-2, SB2801
SS3000, SS3002
Pan/Tilts: PT180-24P, PT180-24SL,
PT280-24P, PT280-24SL
C1906/PP, C1925/PP
Domes: ED2820-PP, ED2820SL/PP,
ED2820-3SL/PP, SB2800/PP,
SB2800-SL/PP
Pan/Tilts: PT180-24P/PP,
PT280-24P/PP, PT280-24SL/PP
3.1 MODEL NUMBERS
C1906 6 ft (1.83 m), pre-wired intercon-
necting inverting cable. (UL)
C1925 25 ft (7.62 m), pre-wired intercon-
necting inverting cable. (UL)
C19125 125 ft (38.1 m), pre-wired inter-
connecting inverting cable. (UL)
C1906/PP 6 ft (1.83 m), same as C1906 but
for PP models. (UL)
C1925/PP 25 ft (7.62 m), same as C1925 but
for PP models. (UL)
1.0 WARNINGS
1. Installation and Servicing should only be done
by Qualified Service Personnel.
2. The installation shall be done in accordance
with all local and national electrical and me-
chanical codes utilizing only approved mate-
rials.
3. Unless the cable is specifically marked “WA”
(for use in wet locations), the cable is designed
for indoor use only and it must not be installed
where exposed to rain and moisture.
2.0 SCOPE
The information within this manual covers the installa-
tion and operation of the C1906, C1925, C19125,
C1906/PP, and C1925/PP pre-wired interconnecting
inverting cables.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.