Filter
Top Products
6 Pelco Manual C361M-A (8/02)
LIMIT STOP ADJUSTMENT
To set pan limit stops, perform the following steps:
1. Loosen the right and left limit stops.
2. Operate the scanner. Pan the unit to the right until the desired right pan limit is
reached.
3. Move the right limit stop to the selected position and secure in place.
4. Pan the unit to the desired left position. Slide the left limit stop to the selected position
and secure in place.
5. Pan left and right to both limit stops to check for exact positioning. Tighten both stops
securely.
To pan the scanner 380 degrees, remove one limit stop from the scanner. Only one limit
stop is removable. The other limit stop is fixed to the scanner; it can be adjusted but not
removed.