Filter
Top Products
C674M (2/06) 3
Introduction
This manual provides instructions for replacing the primary master hard drive in a DX7100 Series DVR (digital video
recorder).
PARTS LIST
NOTE:
This replacement kit includes a Pelco-certified hard disk drive. Using any other hard disk drive with the DX7100
voids the manufacturer's warranty for the DX7100.
1 120 GB hard disk drive
2 Mounting screws
1 DX7100-RPS software recovery CD
Normally, after replacing the hard disk drive, your system should operate properly. However, it if does not, the DX7100-RPS
software recovery CD is provided to restore your DVR to proper operation. Follow the instructions provided on the CD.
TOOLS NEEDED
1 Phillips screwdriver
1 Properly grounded ESD wrist strap and mat
1 Small container to store screws (optional)