Filter
Top Products
C674M (2/06) 7
6. Remove the card cage that holds two hard drives (refer to Figure 5):
a. Disconnect the power and data cables from the hard drives that are installed in the cage.
b. Remove the three screws that hold the cage in place in the chassis.
c. The card cage is locked in place in the bottom of the chassis. To unlock the card cage, slide the card cage about
a half inch toward the back of the chassis and then about a half inch toward the location where the four-
position hard drive cage was installed. Lift the card cage out of the chassis.
Figure 5.
Removing the Two-Position Hard Drive Cage
SCREWS