Filter
Top Products
6 C674M (2/06)
5. Remove the cage that holds four hard drives:
a. Disconnect the power and data cables from any hard drives that are installed in the cage.
b. Remove the two screws that hold the cage in place in the chassis (refer to Figure 3).
c. Disconnect the ground wire that goes to the card cage (refer to Figure 4).
d. The card cage is locked in place in the bottom of the chassis. To unlock the card cage, slide the card cage about
a half inch toward the back of the chassis (refer to Figure 3). Lift the card cage out of the chassis and set it out
of the way.
Figure 3.
Removing the Four-Position Hard Drive Cage
Figure 4.
Disconnecting the Ground Wire
SCREWS
GROUND
WIRE