Filter
Top Products
C2619M (8/06) 11
After the system has completed resetting system configuration and deleting all recorded video, the following message appears.
Figure 14. Completion Message: Resetting System Configuration and Deleting Video
4. Remove the disc, and then restart the unit as follows:
a. Press and hold the power button on the front panel until the unit turns off. The LED lights on the front panel turn dark and the internal
fan stops to indicate that the power is completely turned off.
b. Press and release the power button to turn on the power. The Login screen appears. You can log on to the DVR5100 and continue
working with the DVR5100 as usual.
5. If the procedure was unsuccessful, repeat the procedure.
REVISION HISTORY
Manual # Date Comments
C2619M 8/06 Original version.
Pelco and the Pelco logo are registered trademarks of Pelco. ©Copyright 2006, Pelco. All rights reserved.
Endura is a trademark of Pelco.