Filter
Top Products
12 C2653M (6/07)
Installation
PACKAGE CONTENTS
The following items are supplied:
1 FT82011 or FR82011 module
1 Regulated switching power supply with four plug adapters (North American, Australian, U.K.,
and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output
1 Wall clip with two 4-40 x 0.250-inch Phillips pan head screws with lock washers (for attachment
of single module to wall)
1 FT82011/FR82011 Fiber Transmitter and Receiver Installation manual (this manual)
SETTING 10BASE-T/100BASE-TX PORT MODES OF OPERATION
NOTE: As a matter of convenience, it is recommended that you verify the modes of operation for the
10BASE-T/100-BASE-TX port and then change the mode settings—if necessary—before mounting
the FT82011/FR82011 module into a rack or onto a wall.
The FT82011/FR82011 module provides various configuration options that allow you to select the
desired modes of operation for the 10BASE-T/100BASE-TX port. You can select the desired modes of
operation by means of a TX Mode switch that is provided on the bottom of the module (refer to
Figure 4).
Figure 4. TX Mode Switch for 10BASE-T/100BASE-TX Port
TX Mode
0. Auto Neg / Dis FC
1. 100 FD / Dis FC
2. 100 HD / Dis FC
3. 10 FD / Dis FC
4. 10 HD / Dis FC
5. Auto Neg / En FC
6. 100 FD / En FC
7. 100 HD / En FC
8. 10 FD / En FC
9. 10 HD / En FC
TX MODE SWITCH