Pelco FR82011 Switch User Manual


 
20 C2653M (6/07)
Optic Fault LED ( ) (Continued)
Red Ethernet link
is down.
NOTE: In addition to a red Optic Fault LED,
the 100BASE-FX LED and the left RJ-45 Port
Status LED (Link/Activity) LED are not lit.
A link-down detection condition exists due to
any of the following fault conditions:
100BASE-FX port does not transmit or
receive optical signal:
Disconnected or defective fiber optic
cable
Defective 100BASE-FX port on local or
remote module
Damaged or dirty fiber optic cable
connectors on local or remote module
Optical dB losses in the fiber optic
installation exceed the optical power
budget specification stated in the
Specifications section.
Laser fault on remote module
(Optic Fault LED is flashing red on the
remote module)
Power not connected to remote
module
10BASE-T/100BASE-TX port on the remote
module does not transmit data to or
receive data from the external equipment
connected to it:
Disconnected or defective Category 5e
(or higher) cable
Defective 10BASE-T/100BASE-TX port
Problem with external equipment con-
nected to the 10BASE-T/100BASE-TX
port
For additional information, refer to the
RJ-45 10BASE-T/100BASE-TX Port Status
LED - Left section in this table.
Do any of the following to
restore the link:
Check the connections
of the fiber optic cable.
If the cable is
disconnected, connect
the cable. If the cable is
defective, replace the
cable.
Clean, polish, or replace
fiber optic cable con-
nectors as necessary.
Check for problems
with the fiber optic
installation, for exam-
ple, excessive dB losses
in connectors, splices,
patch panels, cables,
and so on.
Check power connec-
tion of the remote
module. Replace power
supply if necessary.
Check the cable and
external equipment that
connects to the
10BASE-T/100BASE-TX
port on the remote
module.
If the 100BASE-FX port
or 10BASE-T/
100BASE-TX port on the
module is defective,
contact Product
Support.
(Continued on next page)
Table B. Troubleshooting with Front-Panel Indicators (Continued)
Indicator
Color Meaning Possible Cause Corrective Action