Filter
Top Products
12 C2938M (12/06)
CONNECTING DVI INPUT
Refer to Figure 7. To use DVI (Digital Video Interface) input, do the following:
1. Connect the DVI-jack of the Pelco multiviewer, Endura, or computer to the monitor’s DVI input jack.
2. Connect the device’s red (R) and white (L) audio jacks to the monitor’s R and L audio-in jacks located next to the DVI connector. Audio might
be used with DVD players or PCs.
Figure 7.
Connecting DVI Input
CONNECTING EXTERNAL AMPLIFIED SPEAKERS
Refer to Figure 8. You can connect this monitor to an external set of amplified speakers using the EXTERNAL SPEAKER OUTPUT (L/R) jacks
located on the back of the monitor. A standard size phono jack is required to plug into the L/R jacks on the monitor. These line-out connections
can also be sent to an amplifier to play through a stereo or home theater system.
Figure 8.
Connecting External Amplified Speakers
MULTIVIEWER
SPEAKERS SPEAKERS
OR