Filter
Top Products
Custom
4.13” (105mm) x 1.00” minimum
8.6” (218.5mm) x 27 feet (at 200 dpi) max.
8.6” (218.5mm) x 18 feet (at 300 dpi) max.
(14“ maximum length recommended)
Paper Type Thermal—Cut Sheet, Roll Paper,
Perforated Roll, or Fanfold Paper
Paper Loading Manual—Single Sheet or Roll
Form Feed Modes No Feed Mode
Fixed Page Mode
End of Page Mode
Interfaces
USB Printer: USB “Mini-B” and IrDA
(Using USB 1.1 “High Speed”)
Host: USB “A” and IrDA
IrDA Tiny TP extension to IrLMP, IrCOMM
(COM port emulation using 3 wire “cooked”
serial mode [IrLPT]), and IrOBEX, vCard,
vCal and vMSG (text portions only).
Environmental
Temperature Operating: 41º to 95 F (-10º to 35º C)
Note: Operation at low temperatures may
slow the printer or cause it not to print at all.
Storage: 5º to 122º F (-15º to +50º C)
Humidity Operating: 30-80% RH, non-condensing
Storage: 30-85% RH, non-condensing
Electrical
Pentax AC Power Supply Input: 100~240 VAC, 50~60 Hz
1 A Maximum
Output: 15 VDC
Alternate Power Sources DC: 10.0~14.4V from NiMH battery
DC: 10~17 VDC from an external source
Printer Power Connector EIAJ RC-6705 Type A
(2.1mm barrel connector)
Power Usage @ 14.4 VDC Operating: 3.5A peak, 2.6A continuous
Page 56