Filter
Top Products
IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7 51
User Commands Chapter 3
3
This chapter defines all the CLI commands available to users who are logged into the IOLAN.
Commands for Users Logged Into the IOLAN
Admin
Help
Kill Line
Kill Session
Logout
Description Changes a Normal-level user to the Admin user. When you press Enter after you type
this command, you will be prompted for the Admin password.
User Level Normal
Syntax
admin
Description Displays help on using the command line interface (CLI).
User Level Restricted, Normal, Admin
Syntax
help
Description Restarts a line. On IOLANs with more than 1 port, you can specify a port number and
then a range of ports; for example,
kill line 4, 10-13, 15. This command can
also be used to reset the internal modem on the IOLAN. The internal modem is
addressed as last serial port +1 (i.e., on an SDS 3M, the modem is line 4). On single
port models, use the command
kill line.
User Level Normal, Admin
Syntax
kill line *|<number>|<number range>
Note: the * is a wildcard meaning all lines.
Description Kills an active session.
User Level Restricted, Normal, Admin
Syntax
kill session 1|2|3|4
Options 1|2|3|4
The number of the session you want to kill.
Description Logs the user out from the IOLAN.
User Level Restricted, Normal, Admin
Syntax
logout