Filter
Top Products
Line Commands
74 IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7
Syntax
set line .|<number>|* service bidir <config_host> <server_port>
<host_port>
set line .|<number>|* service direct|silent rlogin <config_host>
set line .|<number>|* service direct raw <config_host>
<host_port>
set line .|<number>|* service silent raw <config_host>
<host_port>
[multihost all|backup <config_backup_host> <host_port>|none]
set line .|<number>|* service direct|silent telnet|ssh
<config_host> [<host_port>]
set line .|<number>|* service reverse raw [multihost on|off]|
ssh|telnet <server_port>
set line .|<number>|* service client-tunnel <config_host>
<host_port>
set line .|<number>|* service server-tunnel <server_port>
set line .|<number>|* service dslogin|printer|ppp|slip|udp|
vmodem|modbus-master|modbus-slave|custom-app|power-management
set line .|<number>|* service trueport client-initiated off
<config_host> <host_port> [signal-active on|off]
[multihost all|backup <config_backup_host> <host_port>|none]
set line .|<number>|* service trueport client-initiated on
<server_port> [signal-active on|off] [multihost on|off]
Options bidir
This service allows the IOLAN listen for incoming TCP connection and if needed,
initiate a TCP connection.
<config_host>
The name of the target host. The host must exist in the IOLAN host table.
<server_port>
The IOLAN port number.
<host_port>
The port number the target host is listening on for incoming connections.
direct
Direct connections bypass the IOLAN, enabling the user to log straight into a specific
host. A direct connection is recommended where a user logging in to the IOLAN is not
required. It is also recommended where multiple sessions are not a requirement. The
message
Press return to continue is displayed on the users screen. The user
must press a key to display the host login prompt. The message is redisplayed on
logout.
silent
Silent connections are the same as direct connections, except they are permanently
established. The host login prompt is displayed on the screen. Logging out redisplays
this prompt. Silent connections, unlike direct connections, however, make permanent
use of pseudo tty resources and therefore consume host resources even when not in use.