Filter
Top Products
Perle Gigabit Fiber to Fiber Media Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle Gigabit Standalone Fiber to Fiber Media
Converters (S-1000MM). These products allow dissimilar
1000Base-X fiber interfaces to connect to one another.
These are the fiber to fiber conversion models:
• Multimode to Multimode (MM)
• Multimode to Single Mode (SM)
• Multimode to Single Mode Single Strand (SM)
The first fiber connection will be multimode (MM) and the second
fiber port can be either single mode (SM) or multimode (MM)
depending on the model selected. They can operate over different
wavelengths and distances. (see tables below).
Fiber port 1 – MM1
Model Connector Mode
Distance
Wavelength
(TX/RX)
All models SC/ST/LC MM. 550 m/1804 ft. 850 nm
Fiber port 2 – MM2/SM2
Model Connector Mode
Distance
Wavelength
(TX/RX)
S-1000MM-M2xx05 SC/ST/LC MM 550 m/1804 ft. 850 nm
S-1000MM-M2xx2 SC/ST/LC MM 2 km/1.2mi. 1310 nm
S-1000MM-S2xx10 SC/ST/LC SM 10 km/6.2 mi 1310 nm
S-1000MM-S2xx40 SC/ST/LC SM 40 km/24.9 mi 1310 nm
S-1000MM-S2xx70 SC/ST/LC SM 70 km/43.5 mi 1550 nm
S-1000MM-S2xx120 SC/ST/LC SM 120 km/74.6mi 1550 nm
S-1000MM-S2xx160 SC/ST/LC SM 160 km/100 1550 nm
S-1000MM-S1SC10U SC SM 10 km/6.2 mi. 1310/1490 nm
S-1000MM-S1SC10D SC SM 10 km/6.2 mi. 1490/1310 nm
S-1000MM-S1SC20U SC SM 20 km/12.4 mi. 1310/1490 nm
S-1000MM-S1SC20D SC SM 20 km/12.4 mi. 1490/1310 nm
S-1000MM-S1SC40U SC SM 40 km/25 mi. 1310/1490 nm
S-1000MM-S1SC40D SC SM 40 km/25 mi. 1490/1310 nm
S-1000MM-S1SC80U SC SM 80 km/50 mi. 1510/1590 nm
S-1000MM-S1SC80D SC SM 80 km/50 mi. 1590/1510 nm