Filter
Top Products
Perle PoE/PoE+ 10/100 Ethernet Media Converter
Installation Guide
12
Installing the Simplex Fiber Cable
• Locate a 100BASE-X compliant simplex (1 strand) fiber cable
with appropriate connectors. Ensure that the TX wavelength
matches the RX wavelength at the other end and the RX
wavelength matches the TX wavelength at the other end.
• Connect the fiber cable from one media converter to the other
media converter/switch/fiber device.
Installing the Copper Cable
• Locate 10/100Base-T compliant copper cables with the
appropriate connectors.
• Connect the RJ-45 cable between the Perle media converter
and the device.
Attaching the Power Cord Strain Relief
Clip
1. Remove the screw from the chassis that is closest to the
power cord connector.
2. Feed the power cord through the opening in the power cord
relief clip.
3. Attach the power cord relief clip to the chassis and secure with
the provided screw.
4. Plug the power cord into the AC power connector at the rear
of the chassis.