Filter
Top Products
Perle PoE/PoE+ 10/100 Ethernet Media Converter
Installation Guide
6
Bank 2
Note:
All switch changes take effect immediately. Switch changes
will cycle power to the PD only if the PD Reset switch is set to On
or you make changes to the PSE Power switches.
DIP Switch Settings
Bank 1
Auto-negotiation (copper) (Switch 1)
Switch Position Copper Port
Up (default) Auto
Down Off
Note: Auto-negotiation should only be turned off, if the copper link
partner does not support Auto-negotiation and fixed settings are
required by the copper link partner.
Auto: When enabled, the media converter will negotiate with its
link partner to determine the most optimal parameters for this
connection. The S-110P will advertise capabilities of 10 and 100
Mbps, full and half duplex as well as pause to the link partner.
If the copper link partner does not support Auto-negotiation, the S-
110P will parallel detect to 10 or 100 Mbps and force Half Duplex
mode as per IEEE specifications.
Off: When the Auto-negotiation switch is set to the OFF position,
the media converter will not negotiate the Ethernet parameters