Filter
Top Products
Perle PoE/PoE+ 10/100 Ethernet Media Converter
Installation Guide
15
100- (Copper Port)
On – 100 Mbps (valid link and detected speed is 100 Mbps)
Off – 10 Mbps (if link is currently established)
LKC- (Link Status on Copper port)
On – Copper link is present
Off – No copper link present
Blinking (fast) – Copper link up and receiving data
PSE
Solid Green (Active) – The PSE has successfully detected a compliant
PD and is applying power over UTP.
Solid Orange (Inactive) – The PSE is not active. The PSE has been
configured to provide power, however
• a compliant PD not detected - no power applied
• a PSE has turned off power for Reset function
Off – (Disabled) The PSE function is disabled in the configuration.
Error conditions
A blinking red light is an error condition. The led light will cycle
with a 3 second stop interval between the error condition code.
PSE-LED
1 blink PD Capacitance too high
2 blinks PD Resistance too low or short circuit
3 blinks PD Resistance too high