Filter
Top Products
Frequently Asked Questions
42. How do I adjust the picture on the screen?
Please perform the following to correct the picture image:
● Reset your monitor via the OSD menu
● Adjust the Horz (width) and/or Vert size (height) in the OSD
● Change monitor timing to work at the recommended resolution
43. The edge of the picture on the screen appears to be distorted. How can I correct this?
Please perform the following to correct the picture image:
● A magnetic or electrical interference typically causes poor geometry in the picture. Place the
monitor in a different physical location
● Reset the monitor to the factory preset via the OSD menu
● Access the Geometry Menu in the OSD of the Monitor and perform the necessary adjustments
● Change the monitor timing to the recommended resolution
44. The picture appears too dim. How can I correct this?
Adjust Brightness and/or Contrast via the monitor 's OSD. Some models have a Video Input Select
under Advanced Controls in the monitor 's OSD. Most computers require it to be set at 0.7V.
Please review the following for possible solutions:
● If the OSD menu is also dim, please contact service for repair
● Reset the monitor via the OSD menu
● Change the color temperature settings to 9300 color coordination via the OSD menu
● Set the Contrast to maximum level (100) and Brightness to middle level (50)
Video card could be defective (try the monitor with another computer)
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (12 of 14)7/15/2004 5:32:47 PM