Filter
Top Products
109F Product Information
Q:Can I install LightFrame™ 3 over an older version?
A:When you install LightFrame™ 3 the setup wizard will scan your system to check if you have an older version
installed. If so, the setup wizard will remove that version before continuing with the installation of the new version.
Please be aware that for LightFrame™ 3 you also need a monitor which is capable of running the LightFrame™ 3
feature.
Q:How can I tell which version LightFrame™ my monitor can support?
A:To check which version of LightFrame™ is supported by your monitor check the LightFrame logo which you will
find on the top, right-hand corner of the monitor. If this logo has a small 3 in it, your monitor is ready for
LightFrame™ 3. Otherwise you should use the LightFrame™ 1 or 2 software.
Q: How many windows can I enhance at the same time?
A:In LightFrame™ 3 it is possible to enhance up to 8 windows at the same time. It is however important to
understand that when other windows, toolbars or menus overlap the enhanced windows, the maximum number of
enhanced windows can be less.
Q:How many pictures can LightFrame™ enhance in Internet Explorer?
A:In Internet Explorer LightFrame™ 3 can enhance up to 16 pictures at the same time. LightFrame™ 3 filters the
pictures it finds based on the minimum size of the picture therefore it may happen that some pictures are not
enhanced when you open a web page.
Q:Can I enhance two or more area’s at the same time?
A:Yes. With LightFrame™ 3 you have the possibility to select several windows with pictures and videos and
enhance them at the same time.
Q:Some times my mouse changes to a light bulb with a plus sign and sometimes with a minus sign. What
is the difference?
A:The mouse pointer in the shape of a light bulb indicates that LightFrame™ is ready to accept a selection from
you for which window should be enhanced.
If there is a minus sign it means that you are moving over a window where LightFrame™ is already active and
clicking this window will switch the enhancement off. A plus sign appears when moving over a window which is
not enhanced and clicking that one will enable LightFrame™ on that window.
Q:What is wrong when my mouse changes into a light bulb with a red cross?
A:Nothing. It just means that your mouse moves outside the application where you already have one or more
file:///D|/EDFU/crt_19_5/edoc/english/109F/PRODUCT/PRODUCT.HTM (4 of 10)2005-04-21 ¤W¤È 09:36:20