Filter
Top Products
User Manual BDH5031V
DIGITAL
AUDI
O
OPTICA
L
INPUT
PC AUDIO
SERVICE
PC IN
PC OU
T
AUDIO
HDMI
COMPONENT
INPU
T
AV1 AV2
AUDIO
VIDEO
MENU
MOVE
Cable Broadcasting
Receiver
Video/Audio
S-Video
Video/
Audio
AV 1
AV 2
AV 3
Component
PC
HDMI
Picture
Sound
Screen
Feature
Input
Move Select Exit
RETURN TO THE CONTENT
S
• To watch cable broadcasts, subscribe to your local cable TV broadcast
-
ing, and then connect a cable Broadcasting Receiver to the PDP as
shown left.
• Prepare the A/V cable.
• Connect the receiver (Output) to PDP (Video Input) as shown below.
• N.B. :
If both S-Video and Video/Audio (RCA) cables are connected to
-
gether in AV3 input, S-Video always takes precedence. However, the left
and right audio leads should be connected for the sound even though you
would like to use S-Video as AV3 input.
• Turn the PDP and the receiver ON.
• Select [AV 1 (Scart), AV 2 (Scart) or AV3 (S-Video)] by pressing the “AV”
button of the remote control or the in keypad of the PDP unit.
• When you press the “AV” button, you will see the OSD as shown. You
can move using “
/“ and select desire input mode with “
/“ but-
ton.
• Select the desired program and function by using the remote control
of the Cable Broadcasting Receiver.
Notes:
1) If your local cable company re-transmits digital broadcasts, you may
watch normal broadcasts and digital broadcasts simultaneously. For
detailed information, refer to your local cable company.
2) Only AV1 provides ‘Monitor Out’ function.
3) AV1 full scart (RGB/CVBS).
4) AV2 half scart (CVBS).