Filter
Top Products
User Manual BDH5031V
DIGITAL
AUDI
O
OPTICA
L
INPUT
PC AUDIO
SERVICE
PC IN
PC OU
T
AUDIO
HDMI
COMPONENT
INPU
T
AV1 AV2
AUDIO
VIDEO
MENU
MOVE
AV 1
AV 2
AV 3
Component
PC
HDMI
Picture
Sound
Screen
Feature
Input
Move Select Exit
DVD
DVD
DVD
Component
Video
Audio
Video/
Audio
S-Video
Video/
Audio
RETURN TO THE CONTENTS
• Component Input is set to 480i/576i and 480p/576p mode.
• Connect the cable from the DVD Video output (Y, Pb/Cb, Pr/Cr) to the
Component Input at the back of PDP, and connect the cable from DVD
audio output (Left, Right) to the Audio Input at the back of PDP.
• Prepare the AV cable.
• Connect the DVD (Output) to the PDP (Component or Video Input) as
shown below.
• When connecting to an external AV source, be sure to match the col-
ours.
• N.B. : Video input can be via scart cable, S-Video, or Yellow phone. The red
and white plugs are for left and right audio to accompany the yellow video
lead or to be used with the S-Video lead to produce sound.
• Turn the PDP and the DVD ON.
• Select [Component, AV1 (Scart), AV2 (Scart) or AV3 (S-Video)] by press
-
ing the [AV] button of the remote control or the in keypad of the PDP
unit.
• When you press the “AV” button, you will see the OSD as shown. You
can move using “/“ and select desire input mode with “/
“ but-
ton.
• Select the desired title and function by using the remote control of the
DVD.
Notes:
1) Y/Cb/Cr, which stands for component video DVD player’s output can also
be written as Y/B-Y/R-Y, Y/Pb/Pr depending on the kinds of DVD model.
2) The way of connecting the DVD to the PDP is as follows:
Y Y, Cb
Pb, B-Y, Cr Pr, R-Y
3) The DVD output can be Video, S-Video or Component Video depending
on the DVD model. There are various output modes, so be sure to check
when you purchase it.
4) When connecting S-Video and Video simultaneously, only S-Video will be
displayed on the screen as it takes precedence.