Filter
Top Products
User Manual BDH5031V
P.MODE
RETURN TO THE CONTENTS
• Select the Picture mode that is appropriate depending on the kinds of
pictures, you enjoy.
• Press the “P.MODE” on the remote control.
• While pressing the “P.MODE” for the first time, the current picture
mode will be displayed.
• Each time you press the button, a different picture mode appears. The
sequence used is as follows:
* : For a highly defined image in a normally bright room
* : For a clear-cut image emphasizing high contrast for sports
viewing.
* : For a movie
* : Allows the user to customise settings as desired.
• After selecting a desired picture mode, the menu on the screen will be
disappeared.
• If you want to customise the picture mode, refer to the following page.
Notes:
1) Normal, Dynamic, and Cinema modes are factory preset values.
2) When adjusting sub-menus while you are in Normal, Dynamic, and
Cinema modes, the Picture Mode will be automatically converted to User
Mode, and the adjustments will be made.
3) Selecting [Mode Reset] in the [Feature], menu will allow the Brightness,
Contrast, etc. to return to the factory preset values.