Filter
Top Products
Trap
Specify the IP address of the NMS to notify when a significant event is
detected by the agent.When a trap condition occurs, the SNMP agent
sends an SNMP trap message to any NMS specified as a trap receiver.
Parameter Description
IP Address Traps are sent to this address when errors or specific events occur on the
network.
Community A community string (password) specified for trap management.
Enter a word, something other than public or private, to prevent unauthorized
individuals from accessing information on your system.
Version Sets the trap status to disabled, or enabled with V1 or V2c.
The v2c protocol was proposed in late 1995 and includes enhancements to v1
that are universally accepted.These include a get-bulk command to reduce
network management traffic when retrieving a sequence of MIB variables, and
a more elaborate set of error codes for improved reporting to a Network
Management Station.
Finding the MAC address of a Network Card
Windows 98/ME
Click Start/Run.Type ‘winipcfg’ and press ‘ENTER’.
The MAC address is in the ‘Adapter Address’ section.
Windows NT4/2000/XP
Click Start/Programs/Command Prompt.Type ‘ipconfig /all’and press ‘ENTER’.
The MAC address is listed as the ‘Physical Address.’
Macintosh
Click System Preferences/Network.
The MAC address is listed as the ‘Ethernet Address’ on the TCP/IP tab.
Linux
Run the command ‘/sbin/ifconfig.’
ENGLISH 53