Filter
Top Products
English
12
CD Operation
Basic playback controls
To play a disc
● Press 2; to start playback.
➜ The current track number and “PLAY” icon
are displayed during disc playback.
To select a different track
● Press 4 / ¢ once or repeatedly until the
desired track number appears in the display.
To find a passage within a track
1 Press and hold down on 4 / ¢.
➜ The disc is played at high speed and low
volume.
2 When you recognise the passage you want,
release 4 / ¢.
➜ Normal playback continues.
To interrupt playback
● Press 2; during playback.
➜ The display freezes and “PLAY” icon flashes
when playback is interrupted.
➜ To resume, press 2; again.
To stop playback
● Press 9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER, DAB or AUX.
– you select standby.
IMPORTANT:
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
● CD-ROM, CD-I, CDV, MP3 CD, VCD, DVD or
computer CDs, however, are not possible.
1 Select CD source.
2 Lift the CD door on the top
of the system to open the
CD compartment.
➜ “OPEN” is displayed
when you open the CD
compartment.
3 Insert a disc with the printed side facing up and
press down on PULL TO OPEN to close the
CD door.
➜ “READING” is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks is shown.
PULL TO OPEN
9
MCB146_05_Eng_ASDA 4/2/10, 15:0512