Filter
Top Products
19
English
Clock/Timer
6 Press 4 / ¢ to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and activated.
Note:
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
Activating and deactivating
TIMER
● In standby or during playback, press TIMER
once.
➜ Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
● During playback, press SLEEP on the remote
control once or more.
➜ Display shows and one of the sleep time
options in sequence: 60, 45, 30,15, 0, 60... if
you have selected a time.
● To deactivate, during playback, press SLEEP on
the remote control once or more until “ 0“
is
shown, or press STANDBY ON 2 (or 2 on
the remote control).
➜ disappears from the display.
Setting the clock
1 In standby mode, press and hold DISPLAY/
CLOCK on the remote control set for 2
seconds.
2 Press PROG on the remote control to select
12-hour or 24-hour display.
3 Press DISPLAY/CLOCK to confirm.
➜ The clock digits for the hours flash.
4 Press 4 / ¢ to set the hours.
5 Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
6 Press 4 / ¢ to set the minutes.
7 Press DISPLAY/CLOCK to confirm the time.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER or DAB is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1 In standby mode, press and hold TIMER about
2 seconds on the remote control.
2 Press SOURCE (or DISC/TUNER/DAB on
the remote control) to select sound source.
3 Press TIMER to confirm your desired mode.
➜ The clock digits for the hours flash.
4 Press 4 / ¢ to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
9
MCB146_05_Eng_ASDA 4/2/10, 15:0619