Filter
Top Products
7
English
Preparations
Rear connections
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
–For optimal performance, use only the
original power cable.
–Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B Antenna Connection
DAB/FM Antenna
It is unnecessary to connect the DAB/FM
antenna since it is fixed to the main unit.
● Adjust the DAB/FM antenna for optimal FM and
DAB reception.
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", red wire to "+" and black
wire to "-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
1
2
speaker
(right)
speaker
(left)
B
C
DAB/ FM wire antenna
AC power cord
MCB146_05_Eng_ASDA 4/2/10, 15:057