Filter
Top Products
24 Philips · PPF 650
EN
Setting up Room Monitoring
Set up the room monitoring on the receiver unit first.
1 On the receiver unit, press [, and using [ select
ACCESSORIES.
2 Confirm with OK.
3 Using [ select
ROOM MONITOR..
4 Confirm with OK.
5 Using [ select the transmitting cordless telephone.
6 Press ô
Call.
7 The transmitting unit starts ringing. Press OK to
accept the call.
8 Using ô
Yes activate the baby-phone function on
the transmitting unit.
The cordless telephones are now connected to each other
in the monitoring mode. Place the transmitting unit in the
room which you would like to acoustically monitor. Keep
the receiver unit with you.
Room Monitoring
Telephone Calls During Room Monitoring
If you get a call when you are in the room monitoring
mode, only the device rings. On the cordless telephone, the
display gets lit up and a message appears.
1 Press ô
ACCEPT on the cordless telephone to accept
the call.
2 Press ’ to end the call. The cordless telephone returns
to the room monitoring mode.
You can place a call when in the room monitoring mode.
1 Press ô
Call and dial the desired number.
2 Press “ to make the connection.
3 Press ’ to end the call. The cordless telephone returns
to the room monitoring mode.
Ending Room Monitoring
Press ’ on any one of the cordless telephones to end the
room monitoring mode.
Notice
Telephone Calls During Room Monitor-
ing
If you get a call when you are in the room mon-
itoring mode, only the device rings. On the
cordless telephone, the display gets lit up and a
message appears.