Filter
Top Products
AM-5
Annunciator Module
Introduction
The SCADA 3000 Annunciator Module is an optional component for use with the SCADA
3000 system. The module provides 8 programmable LED indicators to display the status of
assigned I/O points. The LEDs are bi-color (red/amber), which means that each LED is always
on, thereby preventing a false reading due to a burned-out LED. Red indicates an active or ON
condition and Amber indicates an inactive or OFF condition. The Annunciator LEDs appear as
two-state (ON/OFF) outputs in the SCADA 3000 software. The Annunciator module is housed
in a
1
/8 DIN enclosure for convenient panel mounting.
Technical Support
If any questions arise upon installation or operation of the Annunciator Module, please contact
Phonetics Customer Service Department at the number shown below and have the following
information:
• Date of purchase __________________
• Serial number __________________
Technical support is available from 8:00 AM to 5:00 PM, EST.
You can also contact technical support at any time via e-mail at: support@sensaphone.com
Phonetics, Inc.
901 Tryens Road
Aston, PA 19014
Phone: (610)558-2700
FAX: (610)558-0222
www.sensaphone.com