Filter
Top Products
10
<DRC1087>
En
A HARDWARE TOUR
Rear View
The display is on the top panel.
4 3 2 1
INPUT
+5 G +12G
1
2
DC49
50
1814
Fig.2
1 DC Input
This is the input for DC +5 V and +12 V. Connect the computer power supply.
2 SCSI interface
This is a 50-pin I/O connector according to the SCSI-2 specifications. Use a flat ribbon SCSI connector
to connect to the SCSI host adapter.
3 Function switch
Use the accessory short-circuit sockets to set the SCSI ID number and the drive function.
4 Audio output
This is a connector for analog audio output. As a Molex 70553 is used, please select a suitable
connection cable.