Filter
Top Products
7
Maintenance
7-2 SV60970-OG Rev. A
Your printer is designed to provide trouble-free service with a
minimal amount of care. To keep it in top condition, you
should schedule regular cleaning of the feed rollers, exit
rollers and lower guide.
• Clean the printhead cartridge and cover with a lint-free
cloth and distilled water only. Order cleaning kit, supply
#902-1. See Chapter 8 for ordering instructions.
• Never spray or pour water directly on or into the printer;
excess liquid could harm electronic parts. Always
dampen a rag and apply it to the parts to be cleaned.
• Clean all rubber rollers and transport belts with water or
alcohol.
• Keep petroleum-based cleaning solvents away from
rubber or plastic parts.
NOTE: Use of any other cleaning solvents will void all
warranties.
Follow the steps below to replace the inkjet cartridge.
1. Lift up the blue retaining lever located above the cartridge
holder.
2. Remove the cartridge by pulling the top toward you and
lift the cartridge up and out of the holder.
3. Remove a new print cartridge from its packaging. Take
care not to touch the copper contacts or printhead
nozzles. Remove protective tape from the printhead.
Replacing the
Inkjet Cartridge
General
Cleaning