Filter
Top Products
7
Maintenance
7-12 SV60970-OG Rev. A
8. Place the new half-feed roller on the shaft and secure
with both buttonhead cap screws.
9. Rotate the shaft and replace the feed roller on the other
side with buttonhead screws. See below.
10. Replace the feed roller access plate and fasten with the
four screws.
6. Remove the half feed roller. See the picture below.
7. Rotate the shaft so the screws on the other half of the
roller face up. Remove both screws. Remove the half feed
roller.
Replacing the
Feed Rollers
(continued)