Filter
Top Products
56
z APPENDIX
Maintenance
APPENDIX
Your LPS-1 may need cleaning from time to time, particularly if you are using it in a dusty
environment.
Cleaning the Print Head
The LA Paper Roll used in the LPS-1 is designed to automatically clean the print head. As the LA
Paper Roll passes over the head during printing or label feeding, the print head is cleaned. If
necessary, simply feed the LA Paper Roll using the FEED button to clean the print head.
Cleaning the Roller
Use a Cleaning Sheet to clean the roller as described in the following procedure.
Refer to Accessories on page 61 for details on purchasing Cleaning Sheets.
1
Turn off the LPS-1.
2
Hold the LA Roll compartment cover at the sides near
the front of the LPS-1 and firmly lift up to open the
cover.
3
Remove the LA Roll.
Maintenance
Only use Cleaning Sheets designed for the LPS-1 to clean the roller.
Anything else may scratch or damage the surface of the roller.
Be sure to remove the LA Roll before cleaning the
roller. The roller cleaning function will not operate
correctly if the LA Roll is not removed.