Filter
Top Products
4 • Operating the Printer
Appendix B • Specifications
B-6 Pitney Bowes W660/W680 Operator Guide
Material Notes
Envelopes have a flap along the long edge and are processed by the printer non-flap
edge first. Envelopes may have either a diagonal or straight edge along the envelope
flap.
Booklets are defined as media having physical dimensions 6 x 9" or larger. Booklets
have an opening along their long edge which is covered by a flap with an adhesive seal.
Catalog envelopes have an opening along their short edge which is closed by a flap
with an adhesive seal.
Postcards have no folds or bends. The printable side may have a higher surface
roughness than the non-printable side.
Self-mailers may be of "C," "Z," or 1/2-folded construction. They may not exceed the
maximum allowable thickness as specified on the previous page and must be tabbed
per postal regulations.
A catalog may consist of multiple pages bound by adhesive or tabs on the feed edge
or at 90 degrees with respect to the feed edge.
Sheet stock may consist of 16 to 28 lb. bond as well as 60 to 80 lb. coated stock. The
size and thickness constraints specified above apply.
Material Size and Thickness
Also see the table on the next page.
Material
Specifications
Approved Media
The paper types listed below are approved for use with the W660/W680 Printer. Please
note that the dimensional limits above apply in all cases, and that all media (flats,
envelopes, postcards, catalog envelopes, etc.) must be without windows, unstuffed
and unsealed.
• White Wove
• Bond paper
• Recycled paper
• Coated paper
• Card stock
• Brown kraft
• Manila
Width Height Thickness
Minimum 3" (76mm) 5" (127mm) .003" (.0762mm)
Maximum 12.5" (317.5mm) 15" (381mm) .125" (3.175mm)