Filter
Top Products
10
English
Setting Up
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will ash green.
3. Turn on the lamp by pressing “Power” button on the control
panel and the Power LED will turn green.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically
within “Management” menu; check that “Source Lock” has
been set to “Off”.
If you connect multiple sources at the same time, use the
“Source” button on the control panel or on remote control to
switch.
Powering On/Off the Projector
Turn on the projec-
tor rst and then
the signal sources.
Lens Cap
1
2
Power