Filter
Top Products
5
2.5. Video output settings
For best quality, set the output resolution to match your display’s native resolution to avoid image scaling and
blur.
If you are connecting to an LCD TV, the resolution setting is most likely 1366x768, 1280x720, or 1920x1080. If you
are connecting a LCD computer monitor, projector, or plasma display, refer to the device specifications for the
best matching setting.
Press the space bar to fill in the star (*) before pressing the enter key for <OK>.
2.6. Clock and calendar settings
Set the correct time zone, time, and date.
Daylight Saving (DST) rules can be configured
in Set time zone.
2.7. Setting a password
To prevent unauthorized modification of player settings, set a player
password to hide the menu.
From the top level menu, select “Change password” to set a password.
IMPORTANT: Once a password is set, you can only access the menus by
connecting a USB keyboard and pressing CTRL + ALT + DELETE (3-key
combination) simultaneously. You may connect the keyboard at any
stage of player operation or before/ during boot-up.
If you forget the password, you will need to reset the device. See
Factory reset.
2.8. Factory reset
If you forget a system password you have set, you must reset the system to regain access to the player.
Using the reset button
1 Disconnect power cable from the player unit
2 Press and hold the RESET button
3 Connect the power cable while holding the RESET button until status light flashes (about 15 seconds)
4 Please wait while the system drive is being formatted