Filter
Top Products
DLP
®
Projector – User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
Press the Menu button to open
the Main menu.
2.
Press the cursor
button
to
move to the Status menu.
3.
Press the cursor
button
to
move down to Lamp Hour Reset.
4.
Press the cursor
or Enter
button.
A message screen appears.
5.
Press the cursor buttons in this
order:
; ; ; .
The Status menu appears again
showing the Lamp Hours reset to
zero.
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
1. Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could
result in a severe burn.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on
the projector.
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the pro-
jector lens.
– 37 –