Filter
Top Products
Setup
17
Wireless Screen (ADW-4300 only)
The ADW-4300's settings must match the other Wireless stations.
Note that the ADW-4300 will automatically accept both 802.11b and 802.11g connec-
tions, and no configuration is required for this feature.
To change the ADW-4300's default settings for the Wireless Access Point feature, use
the Wireless link on the main menu to reach the Wireless screen. An example screen
is shown below.
Figure 9: Wireless Screen
Data - Wireless Screen
Identification
Region
Select the correct domain for your location. It is your responsibil-
ity to ensure:
· That the ADW-4300 is only used in domains for which is
licensed.
· That you select the correct domain, so that only the legal
channels for that domain can be selected.
Station name
This is the same as the "Device Name" for the ADW-4300.
SSID
This is also called the "Network Name".
· If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
· To communicate, all Wireless stations should use the same
SSID/ESSID.