Filter
Top Products
ADE-4300/ADW-4300 User Guide
30
Figure 21: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or
Specify an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the
ADE-4300/ADW-4300 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the ADE-4300/ADW-4300.
Specify an IP Address
If your PC is already configured, check with your network administrator before making
the following changes.
1. The Default Gateway must be set to the IP address of the ADE-4300/ADW-4300.
To set this:
· Click the Advanced button on the screen above.
· On the following screen, click the Add button in the Gateways panel, and enter the
ADE-4300/ADW-4300's IP address, as shown in Figure 22 below.
· If necessary, use the Up button to make the ADE-4300/ADW-4300 the first entry in
the Gateways list.