PLANET NOVASwitch series
10
Steady
Green
100M
Lit to indicate that a valid physical
UTP/STP connection exists on
that port runs in 100Mbps
LOWER
ROW
OFF
10M Remains off and Link ON to
indicate the port runs in 10Mbps
Table B: FNSW-2400S Port-LED Functions
2.3 The Rear Panel
Figure 2: Rear View of the Switch
2.3.1 Extension Slot
The Switch port 16/24 can be a 100Base-FX switching port as the
extension module installed. As the module installed, the port 16/24
on the front panel will be disabled.
Please refer to the Installation Guide of the module for the detailed
installation and settings.
NOTE: While powering on, The Switch detects the DIP-
switch status of the module, then shown on the
front panel LED indicators
2.3.2 Power Connector
The Power Connector is designed to use with the power cord
included in the product package. Attach the female end of the
cord to the power connector and the male end of the cord to a
grounded power outlet. The accepted power range is from
100VAC to 240VAC, 50/60Hz.
2.3.3 Fan
All computing and communications devices work best when not
overheated. Please keep the fan area clear so that the cooling
function is not impaired.