Planet Technology FPS-1UA Printer User Manual


 
Page 34
Figure 9: System Configuration - Groups
Device List
On the right side of the screen is a list of all Print Servers found on the network. For
each device, the following data is shown:
Default Name. The Default Server Name is shown on a sticker on the base of the
device.
Device Name. If you have not changed the name, this will be the same as the
Default Server Name.
Printer Port. The number and type of ports is shown in the right column.
If the desired Print Server is not listed, try the following:
Check that the device is installed and ON, then Refresh the list.
Use the Main - Refresh option to search for the Print Server. You need to know
the Default Name of the Print Server. The Default Server Name is shown on a
sticker on the base of the device.
If the Print Server is on another LAN segment, use the InitDevice - Attach Remote
menu option to locate and display the Print Server.
For networks using ONLY TCP/IP, Print Servers without an IP Address will not
appear. Use the InitDevice Connected Protocol option and select other protocol
to find out your printserver.