7
Chapter2 Hardware
Installation
1.
Unpack the print server package and check all the items listed in section 1.2.
2. Connect the print server to the printer you want to share on the network by standard USB or
parallel cable.
3. Connect the power adapter to the print server.
4. The print server will perform the Power-On-Self-Test (POST) after it is powered on. The PWR
LED will still “off”, for few seconds it will turn “on” to indicate that the print server is ready.
NOTE1: MUST use the power adapter shipped with the print server, do NOT use any other
power adapter from any sources.
NOTE2: To prevent the compatibility problem between print server and a few printer, it is
recommended that you power on the print server before the printer.