Filter
Top Products
19
Step1.
If this is your first time installing print server, please install the administrator software on
Windows NT/2000 server first. Refer to section 3.2 for installation instructions.
If your network has already installed a working print server and your Windows NT/2000
server has not yet installed the PTPP driver, please install the client software. Refer to
section 3.4 for installation instructions.
Step2.
Please add/configure the Peer-to-Peer Printing of the Windows NT/2000 network printer and
verify that you can print from Windows NT/2000 to the print server by the installed PTPP
driver.
Step3.
Share the above server’s printer to the network by performing the standard Windows printer
sharing process.
4.3 User Installation and Setup
After server side’s installation is completed, client side will be able to find the server’s shared
printer in Network Neighborhood. You only need to perform Window’s standard Add New Printer
procedure, select “Network Printer” shown in the screen below, and complete the configurations
afterwards to access the shared printer.