Filter
Top Products
11
7. “Name the print Server”, you can assign an easy to memorize name for management. But
note that, this name will be the “Identifier” for the Peer-to-Peer Printing.
NOTE: If this is the first time you configure the print server, the “Print Server Name”
will be the same as the “Device Name” printed at the bottom of the print server.
8. In the system default, IPX and NetBEUI are enabled. But the Peer-to-Peer printing is not support those
protocols, so it will show those protocols are not supported. About the TCP/IP, you can either
assign a fixed IP address for the print server or configure it later by the configuration utility.
Please click “Next”.