Planet Technology MAP-2105 Network Card User Manual


 
The status bar located at the bottom of the AP Finder is displaying the status of the scanning
process. While the –Select Adapter- drop down list, allow user to choose the adapter to configure
the nodes. Two options are available: MLRD Manager or Web-based Configuration Page.
4.2.2 Trap Viewer
The trap viewer is used to catch the alarm or trap send from the MAP-2105, which have their trap
destination IP Address set to the user’s IP Address. In the MLRD Management Suite, user can
switch between the AP Finder and Trap Viewer by selecting the tab at the left bottom corner.
Alternatively, this can be done by choosing View > AP Finder or View > Trap Viewer to toggle
between the pages.
The following figure display the layout of the Trap Viewer.
40