Filter
Top Products
Chapter 2 Basic Network Setup
This chapter describes a basic network environment formed by three mesh AP and one MAP-
2105. The administrators can add the mesh AP freely according to real application.
The sample network topology is as below.
Ethernet Switch
DHCP Server
Router
MAP-2105
802.11b/g
Mobile User
Mesh Relay
Mesh Relay
Mesh
Gt
Step 1: Gateway Configuration:
[Configuration -> Local Service -> VPN Server]
Enable VPN Server = checked
Add New User by pressing Add button
Username: test (it is defined by user)
Password: test (it is defined by user)
Assign IP: 10.16.1.7 (this address must be in the same IP segment as Gateway’s
Backhaul radio IP)
Comment: Testing (it is defined by user)
Status: Enable
4