Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
360
banner configure equipment-info manufacturer-id mfr-id floor floor-id row row-id rack rack-id shelf-rack sr-id manufacturer
mfr-name no banner configure equipment-info [floor | manufacturer | manufacturer-id | rack | row | shelf-rack]
mfr-id -The name of the device model number.
floor-id - The floor number.
row-id - The row number.
rack-id - The rack number.
sr-id -The shelf number in the rack.
mfr-name -The name of the device manufacturer.
Default Setting
None
Command Mode
Global Configuration
Command Usage
Maximum string length for each command attribute is 32 characters.
Input strings cannot contain spaces. The banner configure equipment-info command interprets spaces as data input
boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where
whitespace is necessary for clarity.
Example
Console(config)# banner configure equipment-info manufacturer-id switch35 floor 3 row 10 rack
15 shelf-rack 12 manufacturer ABC Co.
Console(config)#
banner configure equipment-location
This command is used to configure the equipment location information displayed in the banner. Use the no form to restore the
default setting.
Syntax
banner configure equipment-location location no banner configure equipment-location location -The address location of
the device. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure equipment-location command interprets spaces as data input