Filter
Top Products
Chapter 3 SKG-300 Configuration
3.1 Enable SKG-300
In order to use SKG-300 and its features, (1) the SKG-300 adapter must be plugged into the PC, (2) a
telephone handset must be plugged into the SKG-300 adapter, (3) the SKG-300 adapter must be connected
to the telephone wall jack
1
and (4) the SKG-300 agent must be running (see green telephone in the Windows
System Tray).
"Note:
This is only required for making regular phone calls or for forwarding Skype calls
to your mobile (or other off-site) phone or for toll bypass application.
If the SKG-300 Agent is not running (i.e. no green telephone in the system tray), make sure the SKG-300
adapter is connected to the PC and start the SKG-300 Agent as shown below (Start -> All Programs ->
Planet Personal VoIP Gateway -> SKG Agent):
15