Filter
Top Products
PHONE
The RJ-11 connector allows voice communication between the router
and phone through a twisted-pair phone wire.
VDSL2
The RJ-11 connector allows data communication between the router and
the VDSL2 network through a twisted-pair phone wire
Chapter 2 Hardware Installation
This chapter offers information about installing your router. If you are not familiar with
the hardware or software parameters presented here, please consult your service
provider for the values needed.
2.1 System Requirement
1. Personal computer (PC)
2. Pentium II 233 MHz processor minimum
3. 32 MB RAM minimum
4. 20 MB of free disk space minimum
2.2 Hardware Installation
This section describes how to connect and configure VC-200M/VC-200S.
To PC/Hub To VDSL2/Phone Line
Power Adapter
Step 1. Connect the VDSL2 Line
There are two ways to connect VC-200M or VC-2000S.
I. Connect the supplied RJ11 cable to VDSL2 ports between VC-200M and
10